IBM TotalStorage FAStT700, User Manual

Page: 69 / 100

Statement 5:
CAUTION:
The power control button on the device and the power switch on the
power supply do not turn off the electrical current supplied to the device.
The device also might have more than one power cord. To remove all
electrical current from the device, ensure that all power cords are
disconnected from the power source.
1
2
2. Turn off the power switch and unplug the power cord from the failed power
supply (see Figure 43 on page 50).
Statement 8:
CAUTION:
Never remove the cover on a power supply or any part that has the
following label attached.
Hazardous voltage, current, and energy levels are present inside any
component that has this label attached. There are no serviceable parts
inside these components. If you suspect a problem with one of these
parts, contact a service technician.
3. Using Figure 44 on page 52 as a guide, remove the failed power supply. Lift up
and pull out on the pull handle to release the power supply; then, slide the unit
Chapter 3. Replacing FAStT700 Storage Server components
51