IBM TotalStorage FAStT700, User Manual

Page: 58 / 100

Statement 8:
CAUTION:
Never remove the cover on a power supply or any part that has the
following label attached.
Hazardous voltage, current, and energy levels are present inside any
component that has this label attached. There are no serviceable parts
inside these components. If you suspect a problem with one of these
parts, contact a service technician.
2. Remove the FAStT700 Storage Server bezel, as shown in Figure 20 on
page 16.
Attention: Be careful when removing the battery. The battery weighs
approximately 6.4 kg (14 lb.).
3. Using Figure 35 on page 41 as a guide, remove the battery.
a. Loosen the four captive screws on the battery. If necessary, use a flat
blade screwdriver to loosen the screws.
b. Using both pull handles, slide out the battery about 5 cm (2 in.).
c. Using both hands, grasp the sides of the battery and pull out.
40
IBM
®
TotalStorage
™
FAStT700 Fibre Channel Storage Server: User’s Guide