manualshive.com logo in svg

IBM TotalStorage Enterprise 3592, Maintenance Information

Share
Download
IBM TotalStorage Enterprise 3592 Maintenance Information Download Page 201

Repacking instructions

Before the 3592 is repacked for return, transportation, or storage, verify that no tape cartridge is in the

drive. If a cartridge is present, unload it and remove it.
Consider reusing the packaging that was used when you received a drive canister at installation or as a

FRU (as recommended in “Before installation” on page 168). If you cannot locate the original packaging,

you can order a relocation kit. See “3592 EH7/EH8/55E/55F/60F Rack FRU list” on page 259 for the

relocation kit part number.

Installation  181

Summary of Contents for TotalStorage Enterprise 3592











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands