IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 547 / 605

Table 46. Import List File Identifier
Length Name Description
0–10 Title Text “IMPORT LIST”
11 Field Delimiter Blank character
12–13 Version “01”: Original Import List File Format
“02”: Version “02” permits use of the Import Options 1
Record. The VTS must have FC 4001 installed.
14 Blank Blank character
15–30 User Field This 16-byte field is not checked or used by the control
unit.
31–79 Retained, not
checked.
This field is not checked or used by the control unit.
The format of the Import Options 1 Record is relatively free-form. Fields are
separated by comma characters as delimiters and any amount of white space.
Table 47. Import Options 1 Record
Name Description
Record Identifier
OPTIONS1
Must be in bytes 0–7.
Construct Action One of the following must be specified:
FAILIMPORT
If the construct name does not exist
on the Library Manager, the Import
is failed for the associated LVOL.
Also, the import is failed if any of
the four constructs were defaulted
to blanks. For example, No name
was specified on the Export
Physical Volume or the Import List
File.
CREATENAME
If the construct name doesn’t exist
on the Library Manager, the
construct name is created on the
Library Manager, assigned default
actions for the construct type, and
associated with the LVOL being
imported. A default construct name
of all blanks is permitted with this
action. This is the default action if
no OPTIONS1 record is included.
USEDEFAULT
If the construct name does not exist,
the default construct name (all
blanks) is associated with the
logical volume being imported.
Appendix B. VTS Export and Import Advanced Function
521