IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 377 / 605

Host Alias (optional)
The alias for a host is a user-supplied nickname for that host. This is an
optional field, and you may leave it blank if you do not want an alias. This
entry field accepts only alphanumeric characters and the “.”, “-”, and “_”
characters.
Host IP Address
The Host IP Address is the unique Internet address assigned to the host.
This field accepts only digits and the “.”, “-”, and “_” characters. Blank
spaces are not valid. The correct form is dotted decimal notation
(xxx.xxx.xxx.xxx where xxx represents a number from 000–255).
Host Name
The Host Name is the Hostname defined in the TCP/IP network. This field
accepts only alphanumeric characters and the “.”, “-”, and “_” characters.
Blank spaces are not valid.
Note: If the host is an AS/400 or iSeries, the following commands provide the
information that you need to update the Change LAN Host Information
window:
v
If the AS/400 or iSeries operating system is earlier than Version 3 Release
6, use DSPLANMLD (the Display LAN Information command).
v If the AS/400 or iSeries operating system is Version 3 Release 6 or later,
use DSPLANMLB (the Display LAN Media Library Information
command).
The Change LAN Host Information window has the following push buttons:
OK Updates the LAN host information by using the changes entered in the
Change LAN Host Information window.
a06c0306
Figure 226. Change LAN Host Information Window (TCP/IP)
Chapter 6. Advanced Operating Procedures
351