IBM System Storage TS7650G 3958 DD4, Installation Roadmap Manual

Page: 43 / 232

What is not covered in this document
This document does not address the following topics:
v Installation of the second dual-port Ethernet adapter in a legacy 3958 DD1
server, to prepare the server for use in replication. Refer to the IBM(r) System
Storage(tm) TS7600 with ProtecTIER Second Dual-Port Ethernet Card (Feature Code
3448) Installation Instructions, IBM part number 45E6768.
v
Upgrades of the software on legacy 3958 DD1, 3958 DD3, or 3958 AP1servers.
Refer to IBM System Storage ProtecTIER Software Upgrade and Replication
Enablement Guide, IBM form number GC53–1196.
v
Physical installation of the disk controllers or disk expansion modules. Disk
components must be installed prior to the installation of the TS7650G.
v Configuration and setup of any recommended hardware components that were
not included in the purchase of the TS7650G.
Components such as the disk controller and disk expansion modules must be
configured and operational prior to the installation of the TS7650G.
v Creation and configuration of replication grids. Refer to the IBM System Storage
ProtecTIER User's Guide for Enterprise Edition and Appliance Edition, IBM form
number GC53–1156
v
Daily use and ongoing maintenance of the ProtecTIER, ProtecTIER Manager, and
ProtecTIER Replication Manager, software. Refer to the IBM System Storage
ProtecTIER User's Guide for Enterprise Edition and Appliance Edition, IBM form
number GC53–1156.
v
Hardware or software troubleshooting. Refer to the IBM System Storage TS7600
with ProtecTIER Problem Determination Guide for the TS7650 Appliance and TS7650G
(Gateway), IBM form number GC53-1157.
Chapter 1. Overview
5