IBM System Storage TS3310, Maintenance Information

Page: 51 / 531

For details on testing the configuration path for LME enabled libraries, see "LME
Key Path Diagnostics in the Setup and Operator Guide.
System-managed tape encryption and library-managed tape encryption
interoperate with one another. Therefore, a tape encrypted using SME may be
decrypted using LME, and vice versa, provided they both have access to the same
keys and certificates.
Encryption Key Management (EKM) is a Java software program that assists
encryption-enabled tape drives in generating, protecting, storing, and maintaining
encryption keys that are used to encrypt information being written to, and decrypt
information being read from, tape media. You must supply a server or servers on
which to install EKM. It is strongly recommended that you use both a primary and
secondary EKM server.
For information on how to install, configure, and use the EKM, see the IBM
Encryption Key Manager component for the Java platform, Introduction, Planning and
User's Guide GA76-0418
, and the IBM Encryption Key Manager component for the Java
platform, Quick Start Guide for LTO Ultrium 4 GA76-0420, which are both available
for download at: http://www-1.ibm.com/support/docview.wss?uid=ssg1S4000504.
For information on how to install, configure, and use the Tivoli Key Lifecycle
Manager (TKM), see the
IBM Tivoli Key Lifecycle Manager Quick Start Guide
(GI11-8738) and IBM Tivoli Key Lifecycle Manager Installation and Configuration Guide
(SC23-9977) .
IBM Tivoli
®
Key Lifecycle Manager V1.0 (English) publications may be
downloaded from the following Web site: http://www.ibm.com/software/tivoli/
library.
Library & Drive Code Update (Feature Code 0500)
Order feature code 0500, Library and Drive Code Update, if you would like an
IBM Service Representative dispatched to your location to update your library and
drive firmware.
Location Coordinates
A numbering system is used to identify components of the library. The library
location coordinates contain the following digits: [Module],[Column],[Slot]. The
figure below illustrates how a library with a control module and an expansion
module are numbered.
Chapter 2. Product Description
2-23
|
|
|
|
|
|
|