IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 224 / 257

E-4
TS2900 Tape Autoloader Setup, Operator, and Service Guide
SCSI Sense Data – Tape Drive Error
The following example of SCSI Sense Data was received from a System p Open
System host and shows a Tape Drive Failure and what the sense data would look like.
Like the SCSI sense data in the previous example, this data contains valid sense data
as defined by the hex “71” in the first sense byte position. Therefore, we have valid
data to rely on. While the data shows that this is a TAPE_ERR2, further review of the
ASC/ASCQ (Media Load or Eject Failed) points more to a problem with the media or
the drive. The fact that a FID was listed (“86”) defines the failure as “The drive
detected a drive hardware or media fault”. In this case, the FID should be followed to
make a repair. For more information about Sense Key and ASC/ASCQ fields, refer to
the
IBM TotalStorage LTO Ultrium Tape Drive SCSI Reference .
LABEL: TAPE_ERR2
IDENTIFIER: 476B351D
Date/Time: Wed May 09 07:51:42 DFT
Sequence Number: 1669
Machine Id: 0046083B4C00
Node Id: risc4
Class: H
Type: PERM
Resource Name:
rmt0
Resource Class: tape
Resource Type: LTO
Location: P1.1-I3/Q1-W5003013D38321011-L0
VPD:
Manufacturer................
IBM
Machine Type and Model...... ULT3573-TD4
Serial Number...............1300000680
Device Specific.(FW)........74H4 (Firmware Level)
Loadable Microcode Level....A1700D5C
Description
TAPE DRIVE FAILURE
Probable Causes
TAPE DRIVE
Failure Causes
TAPE
TAPE DRIVE
Recommended Actions
PERFORM PROBLEM DETERMINATION PROCEDURES
Detail Data
SENSE DATA
0600 0000 0000 0000 0000 0000 0000 0000 0102 0000
71 00 04 00 0000 0058 0000 0000
5300 86 02 8E07 0000 0001 0110 0001 0000 0000 0000 0200 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 2800 01E0 0000 0000 0000 4133 3820
2020 2000 0000 0000 0000 0000 0000 8000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000