IBM SYSTEM STORAGE EXP3000 - INTEROPERABILITY MATRIX 10-19-2010, Manual, Page: 27 / 64

Connecting the power cords
The EXP3000 comes with two power cords. You can connect the power cords to a
primary power unit inside the rack cabinet, such as a properly grounded ac power
distribution unit (PDU) or uninterruptible power supply.
Note: Power cords, specific to a country, can be purchased separately.
For information about the initial startup of the EXP3000, see “EXP3000 power
features” on page 21.
Systems-management software support
The EXP3000 provides software alert functions through the systems-management
functions that are provided by the management software that comes with your RAID
controller.
The following alerts are supported:
v
Hard disk drive disabled
v
Power-supply failure
v Fan failure
v
Normal operating temperature exceeded
Chapter 2. Installation
15