IBM System Storage DS3000, Programming Manual

Page: 330 / 652

Note: Within the subsystem, you cannot move logical drives that are associated with the premium
features from one storage subsystem to another storage subsystem.
Syntax
start array [ arrayName ] import
Parameter
Parameter Description
array
The alphanumeric identifier of the array (including - and _)
that you want to import. Enclose the subsystem identifier in
square brackets ([ ]).
Notes
Higher-level logical drives that are specifically related to premium features (FlashCopy, Enhanced Remote
Mirroring, VolumeCopy, mapping, and persistent reservations) are removed as part of the import
operation.
The
show subsystem importDependencies
command must be run before the
start subsystem import
command.
Start subsystem Locate
This command identifies the disk drives that are logically grouped together to form the specified
subsystem by flashing the indicator lights on the disk drives. (Use the
stop subsystem locate
command
to turn off the indicator lights on the disk drives.)
Syntax
start subsystem [ subsystemNumber ] locate
Parameter
Parameter Description
subsystem The alphanumeric identifier of the subsystem (including -
and _) for which you want to locate the disk drives that
belong to that subsystem. Enclose the subsystem identifier
in square brackets ([ ]).
Start Enhanced Global Mirroring synchronization
This command starts Enhanced Global Mirroring synchronization.
Syntax
start enhancedGlobalMirrorGroup ["enhancedGlobalMirrorGroupName"]
synchronize
3-284
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide