IBM System Storage DS3000, Programming Manual

Page: 259 / 652

Parameter Description
hostType
The index label or number of the host type for the HBA host port. Use
the
show storageSubsystem hostTypeTable command to generate a list
of available host type identifiers. If the host type has special
characters, enclose the host type in double quotation marks (“ ”).
Host Group
Parameter Host Has Individual
Volume-to-LUN mappings Host Does Not Have Individual
Logical drive-to-LUN Mappings
hostGroupName The host is removed from the
present host group and is
placed under the new host
group defined by
hostGroupName .
The host is removed from the
present host group and is placed
under the new host group
defined by
hostGroupName .
none The host is removed from the
host group as an independent
partition and is placed under
the root node. The host is removed from the
present host group and is placed
under the default group.
defaultGroup
The command fails. The host is removed from the
present host group and is placed
under the default group.
Notes
When you use this command, you can specify one or more of the optional parameters.
For the names, you can use any combination of alphanumeric characters, hyphens, and underscores.
Names can have a maximum of 30 characters.
Related Topic
Naming Conventions
Set Host Channel
This command defines the loop ID for the host channel.
Syntax
set hostChannel [ hostChannelNumber ]
preferredID= portID
Chapter 3. Script Commands
3-213