IBM System Storage DS3000, Programming Manual

Page: 232 / 652

Set subsystem Forced State
This command moves an subsystem into a Forced state. Use this command if the
start subsystem import
command does not move the subsystem to an Imported state or if the import operation does not work
because of hardware errors. In a Forced state, the subsystem can be imported, and you can then identify
the hardware errors.
Syntax
set subsystem [subsystemName] forcedState
Parameter
Parameter Description
subsystem The alphanumeric identifier (including - and _) of the
subsystem that you want to place in a Forced state. Enclose the
subsystem identifier in square brackets ([ ]).
Notes
You can move the disk drives that comprise an subsystem from one storage subsystem to another storage
subsystem. The CLI provides three commands that let you move the disk drives. The commands are
start subsystem export
,
start subsystem import
, and
set subsystem forcedState
.
In the Forced state, you can perform an import operation on the subsystem.
Set Enhanced Global Mirror Group
Use this command to change the synchronization settings and warning thresholds that the controller
owner of the primary side of the Enhanced Global Mirror Group uses when it performs an initial
synchronization or resynchronization. Changing the synchronization settings affects the synchronization
operations of all mirrored pairs within the Enhanced Global Mirror Group.
Syntax
set enhancedGlobalMirrorGroup ["enhancedGlobalMirrorGroupName"]
[syncInterval=integer (minutes | hours | days)
warningSyncThreshold=integer (minutes | hours | days)
warningRecoveryThreshold=integer (minutes | hours |
days)
warningThresholdPercent=percentValue
userLabel="New_enhancedGlobalMirrorGroupName"
autoResync=(TRUE | FALSE)
volume="repos_xxxx" increaseRepositoryCapacity
(repositoryVolume=("repos_xxxx") |
repositoryVolumes=("repos_xxxx" "repos_xxxx"))
role=(primary | secondary)
(force=TRUE | FALSE | noSync=TRUE | FALSE)
3-186
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide