Chapter 2. Specifications and requirements
See the appendix for additional specifications.
Appliance specifications
v
2 x Intel Xeon E5-2698v4 processors
v
16 x 16 GB PC4-17000 2133 MHz ECC Registered RAM modules
v
Two 150 GB SSD OS drives
v
Onboard IPMI
v
2 Onboard 1 Gbps network ports.
v
1 Onboard 1 Gbps dedicated IPMI network port.
v
Four dual-rotor 80 mm internal fans
v
2 hot-swappable 1100 W PSUs in 1+1 configuration
More Networking Options
The appliance can support other networking cards to provide more Ethernet ports. These ports are shown
in the highlighted card slots on the rear of the appliance in the following figure.
Requirements
Cabling
Table 1. Cabling requirements for the appliance
Cable
Type and Usage
Power cords
Use only the power cords that are supplied with the appliance. Do not use another type
of cord. Do not use extension cords. If extra power cords are needed, contact IBM
Support.
1000BASE-T Copper
Cables
Use high-quality Category 5e or 5 (CAT5e, CAT5) copper cables.
Figure 1. Rear of appliance with card slot highlighted
© Copyright IBM Corp. 2018
3
Summary of Contents for Slicestor 3448
Page 51: ......
Page 52: ...IBM Printed in USA ...
