IBM ServeRAID M5025, User Manual

Page: 55 / 86

Installing the iBBU on the ServeRAID M5025 Controller 5-5
Figure 5.3 Installing the ServeRAID M5025 SAS/SATA Controller
8. Attach the controller to the computer chassis with the bracket screw.
9. Attach the cables, as needed, to the connectors on the controller.
10. Reinstall the computer cover, reattach the power cords, and turn on
the power to the computer.
5.1.1 Connecting the iBBU Remotely to the ServeRAID M5025
SAS/SATA Controller
You can use the supplied 20-pin cable to connect the iBBU remotely to
the ServeRAID M5025 controller. Follow these steps to install the iBBU
remotely to the controller.
1. Ground yourself, and remove the iBBU from the package.
2. Use the three Phillips-head screws that are provided to secure the
iBBU to the motherboard or the server chassis.
85040-11
Edge of
Motherboard
iBBU (Top View)
32-bit slots
(3.3 V)
PCIe
slot
Bracket Screw
64-bit slots
(3.3 V)
Press here
Press here
Pb
LSI 31503-00
Rev
. B
Caution:
Danger
of
expl
osion
if battery
is
incorr
ectly
replaced.
Replace
with
sam
e
or
equi
valent
type
recomm
ended
by
m
anufacturer
.
Dispose
o
f u
sed
b
atteri
es
a
ccordi
ng
to
m
anufactur
er'
s instructi
ons.
e1
Pb
ASSEMBLED
IN USA
.
WWYYN0000