IBM ServeRAID-4 Ultra160 Series, User Reference

Page: 78 / 208

Notes:
a. where /dev/fd0 is the specific device file for the diskette drive block device. If
you have more than one diskette drive, you must replace /dev/fd0 with the
specific name of the diskette drive you want to use.
b. If you currently have another device mounted on /mnt, you must create a
new directory and substitute its name for /mnt in these instructions.
4. Press Enter; then, type:
gunzip -c /mnt/linux/ipssend > /usr/bin/ipssend
5. Press Enter; then, unmount the diskette drive by typing the following:
umount / mnt
where /mnt is the directory you mounted in step 3 on page 59.
6. Press Enter. Remove the diskette from the diskette drive.
7. Change the access permissions by typing the following:
chmod 700 /usr/bin/ipssend
8. Press Enter.
Installing IPSSEND for OpenServer
To install this program for OpenServer 5.0.5 or 5.0.6:
1. Start the server.
2. After the operating system starts, insert the IBM ServeRAID Support CD into the
CD-ROM drive.
3. Mount the CD by typing the following at the console:
mount -fISO9660 -o ro,lower / dev / cd0 / mnt
Notes:
a. where /dev/cd0 is the specific device file for the CD-ROM block device. If
you have more than one CD-ROM, you must replace /dev/cd0 with the
specific name of the CD-ROM you want to use.
b. If you currently have another device mounted on /mnt, you must create a
new directory and substitute its name for /mnt in these instructions.
4. Press Enter; then, type:
cp /mnt/programs/openserv/cmdline/ipssend /usr/bin
5. Press Enter; then, type:
chmod 700 /usr/bin/ipssend
6. Press Enter; then, unmount the CD-ROM by typing the following:
umount / mnt
7. Press Enter. Remove the CD from the CD-ROM drive.
Installing IPSSEND for UnixWare
You can install this program for UnixWare 7.1 using either the IBM ServeRAID
Support CD or the IBM ServeRAID Command-Line Programs diskette.
Installing IPSSEND for UnixWare from CD
To install these programs for UnixWare 7.1 from the IBM ServeRAID Support CD,
do the following:
1. Start the server.
2. After the operating system starts, insert the IBM ServeRAID Support CD into the
CD-ROM drive.
3. Mount the CD by typing the following at the console:
60
IBM
®
User’s Reference: ServeRAID
™
-4 Ultra160 SCSI Controller