IBM SAN768B-2, User Manual

Page: 156 / 228

v nsShow
v nsAllShow
v switchShow
v fabricShow
v lscfg --show
(if using the virtual fabric feature)
switch:admin> nsshow
Type Pid COS PortName NodeName TTL(sec)
N 020f00; 3;10:00:00:01:73:00:29:46;10:00:00:01:73:00:29:46; na
Fabric Port Name: 20:0f:00:60:69:90:03:f0
<output truncated>
switch:admin> nsallshow
{
020f00 021fda 021fdc 021fe0 021fe1
5 Nx_Ports in the Fabric}
switch:admin> switchshow
switchName: swDir
<output truncated>
switch:admin> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
<output truncated>
switch:admin>
switch:admin> lscfg --show
Created switches: 128(ds) 1 2(bs)
Port
0 1 2 3 4 5 6 7 8 9
-------------------------------------------------------------------
FID
1 | 1 | 1 | 1 | 1 | 128 | 128 | 128 | 128 | 128 |
<output truncated>
switch:admin>
2. Determine any differences between the information in the "SANafter.txt" file
and the information in the "SANbefor.txt" file created earlier. In particular, look
for differences in the following items:
v
Device types
v
Number of devices
v
ISL and port states
v
Number of switches in the fabric
3. Resolve any issues or unintentional changes to the SAN768B-2 or fabric.
v If there are any mechanical problems, try reseating the associated component.
v
If the configuration information is not correct for the SAN768B-2, modify as
required.
v If other issues exist, contact technical support.
Cable routing tables
Table 18 on page 129 provides a sample of cable routing information. Create your
own table, or use copies of Table 19 on page 129 to record this information, if it is
not already available. Table 19 on page 129 is a 64-port template for a cable routing
table. Make copies of the table to cover the total number of ports in the system.
128
SAN768B-2 Installation, Service, and User Guide