IBM SAN64B-6, Installation, Service And User Manual

Page: 19 / 122

DANGER: Hazardous voltage, current, or energy levels are present inside
any component that has this label attached. Do not open any cover or
barrier that contains this label. (L001)
DANGER: Rack-mounted devices are not to be used as a shelf or work
space. (L002)
DANGER: Multiple power cords. The product might be equipped with
multiple power cords. To remove all hazardous voltages, disconnect all
power cords. (L003)
DANGER: Hazardous voltage present. Voltages present constitute a shock
hazard, which can cause severe injury or death. (L004)
CAUTION: Hazardous moving parts nearby. (L008)
Attention notices
An attention notice indicates the possibility of damage to a program, device, or system, or to data. An
exclamation point symbol may accompany an attention notice, but is not required. A sample attention
notice follows:
Attention: Do not bend a fibre cable to a radius less than 5 cm (2 in.); you can damage the cable.
Tie wraps are not recommended for optical cables because they can be easily overtightened,
causing damage to the cable.
Safety and environmental notices xix