IBM SAN512B-6, Installation, Service And User Manual

Page: 53 / 286

v Flathead screwdriver.
v
Hydraulic or assisted lift with a minimum raise of 140 cm (55 in.) and a
minimum capacity of 158.76 kg (350 lbs)
DANGER
If a lift tool with a capacity of at least 350 lbs is not available, the director
chassis must be depopulated completely before installing it into the rack.
Remove the power supplies, fan modules, all of the blades, the cable
management comb, and the chassis door (if equipped). Install the empty
chassis into the rack following the chassis installation instructions. The
weight of the empty chassis is 78.5 lbs (35.6 kg) and must be lifted by
minimum 3 people. After securing the chassis to the rack, reinstall the
power supplies, fan modules, and the blades and proceed with the
installation.
Parts list
The following parts are provided with the 14U Chassis Mid-Mount Rack Kit for
Two-Post Racks.
Chapter 3. Mounting the Device
29