IBM SAN Volume Controller 2145-CG8, Hardware Installation Manual

Page: 73 / 110

Appendix A. Accessibility
Accessibility features help a user who has a physical disability, such as restricted
mobility or limited vision, to use software products successfully.
Features
This list includes the major accessibility features in the management GUI:
v
You can use screen-reader software and a digital speech synthesizer to hear what
is displayed on the screen. The following screen reader has been tested: JAWS
11.
v
Most of the GUI features are accessible by using the keyboard. For those features
that are not accessible, equivalent function is available by using the
command-line interface (CLI).
v
When setting or changing an IP address on the SAN Volume Controller front
panel, you can disable the fast increase function to reduce the address scrolling
speed of the up and down buttons to two seconds. This feature is documented
in the topic that discusses initiating cluster (system) creation from the front
panel, which is located in the IBM System Storage SAN Volume Controller
Information Center and the
IBM System Storage SAN Volume Controller Software
Installation and Configuration Guide .
Navigating by keyboard
You can use keys or key combinations to perform operations and initiate many
menu actions that can also be done through mouse actions. You can navigate the
management GUI and help system from the keyboard by using the following key
combinations:
v To navigate between different GUI panels, select the Low-graphics mode option
on the GUI login panel. You can use this option to navigate to all the panels
without manually typing the web addresses.
v
To go to the next frame, press Ctrl+Tab.
v
To move to the previous frame, press Shift+Ctrl+Tab.
v
To navigate to the next link, button, or topic within a panel, press Tab inside a
frame (page).
v
To move to the previous link, button, or topic within a panel, press Shift+Tab.
v
To select GUI objects, press Enter.
v
To print the current page or active frame, press Ctrl+P.
v
To expand a tree node, press the Right Arrow key. To collapse a tree node, press
the Left Arrow key.
v
To scroll all the way up, press Home; to scroll all the way down, press End.
v To go back, press Alt+Left Arrow key.
v
To go forward, press Alt+Right Arrow key.
v
For actions menus:
– Press Tab to navigate to the grid header.
– Press the Left or Right Arrow keys to reach the drop-down field.
– Press Enter to open the drop-down menu.
– Press the Up or Down Arrow keys to select the menu items.
© Copyright IBM Corp. 2012
45