IBM RS/6000 7043 43P Series, Service Manual

Page: 81 / 273

MAP 1540B: Minimum Configuration (for the Model 240)
Step 1540B-1
1. Ensure that the diagnostics and the operating system are shut down.
2. Insert the diagnostic CD-ROM into the CD-ROM drive.
3. Turn the power off.
4. Turn the power on.
5. When the keyboard indicator is displayed (the word keyboard on an ASCII
terminal or the keyboard and hand icon on a graphical display), press the F5 key
on the directly-attached keyboard or the number 5 key on an ASCII terminal.
6. If the Console Selection screen is displayed, choose the system console.
7. Enter the appropriate password when prompted to do so.
Is the "Please define the System Console" screen displayed?
NO Go to “Step 1540B-2” on page 2-40.
YES Go to “Step 1540B-12” on page 2-50.
Chapter 2. Maintenance Analysis Procedures (MAPs)
2-39