IBM RS/6000 7043 43P Series, Service Manual

Page: 190 / 273

Select Install Device: Produces a list of devices, for example the CD-ROM, where
the operating system is installed from. You select one of the devices and the system
searches the device for an operating system to install and if supported by the
operating system in that device, the name of the operating system displays.
Select Boot Device: Provides a list of devices that can be selected to be stored on
the boot list. Up to 5 devices are supported.
OK Prompt: Provides access to the Open Firmware command prompt.
Multiboot Start Option: Toggles between OFF and ON and selects if the Multiboot
menu invokes automatically on startup or not.
Select Boot Devices
This selection enables you to view and change the custom boot list, which is the
sequence of devices read at startup time.
1 2
Select Boot Devices
1. Display Current Settings
2. Restore Default Settings
3. Configure 1st Boot Device
4. Configure 2nd Boot Device
5. Configure 3rd Boot Device
6. Configure 4th Boot Device
7. Configure 5th Boot Device
.------.
|X=Exit|
------'
====>
= >
Figure 7-5. Text-based System Management Services - Select Boot Devices Menu
Display Current Settings: Lists the current order of devices in the boot list. The
following screen shows an example of this display.
7-30
7043 43P Series Service Guide