IBM RackSwitch G8000, Installation Manual

Page: 18 / 86

v
If you are using a Linux operating system, insert the CD into the CD or DVD
drive and run the following command from the
mnt/cd
directory,
sh.linux.sh
.
Select the installation guide that supports your product.
Double click on the Installation Guides directory and select the installation guide
that supports your product.
Hardware and software requirements
The IBM Documentation CD requires the following minimum hardware and
software:
v
Microsoft Windows NT 4.0 (with Service Pack 3 or later), Windows 2000, or Red
Hat Linux.
v 100 MHz microprocessor.
v
32 MB of RAM.
v Adobe Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating
systems. Acrobat Reader software is required for reading the documentation CD.
Related documentation
v IBM System Networking RackSwitch G8000 Application Guide
v
IBM System Networking RackSwitch G8000 Menu-based Command Reference
v IBM System Networking RackSwitch G8000 ISCLI–Industry Standard CLI
Command Reference
v
IBM System Networking RackSwitch G8000 BBI Quick Guide
Notices and statements in this document
The caution and danger statements in this document are also in the multilingual
Safety Information document, which is on the IBM Documentation CD. Each
statement is numbered for reference to the corresponding statement in the Safety
Information document.
The following notices and statements are used in this document:
v Note: These notices provide important tips, guidance, or advice.
v
Important: These notices provide information or advice that might help you avoid
inconvenient or problem situations.
v Attention: These notices indicate potential damage to programs, devices, or
data. An attention notice is placed just before the instruction or situation in which
damage could occur.
v
Caution: These statements indicate situations that can be potentially hazardous
to you. A caution statement is placed just before the description of a potentially
hazardous procedure step or situation.
v
Danger: These statements indicate situations that can be potentially lethal or
extremely hazardous to you. A danger statement is placed just before the
description of a potentially lethal or extremely hazardous procedure step or
situation.
2
IBM System Networking RackSwitch G8000: Installation Guide