Voltage
3.3 V, 12 V
Form factor
Short, with full-height tailstock
Attributes provided
Not hot-pluggable
Passive cooling
Provides 512 MB DDR3 graphics memory
Supports display PORT outputs
Supports two 30 inches (76.2 cm) high-resolution displays
Provides two display port connectors that can attach to any display port cable
Video Electronics Standards Association (VESA) and Display Power Management Signaling (DPMS)
Cables
Please note that display port cables are not included with this adapter. For a list of supported cables,
see below.
Note: IBM does not support video cable lengths that exceed 3 meters.
• Display port to display port cable
• Display port to VGA cable
• Display port to DVI cable
• Display port to HDMI cable
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is required to support the new
feature and that you determine whether any prerequisites must be met for this feature and attaching
devices. For information about operating system and partition requirements, see one of the following
topics:
• The latest version of enabling libraries and utilities can be downloaded from Fix Central (http://
www.ibm.com/support/fixcentral/).
• Power Systems Prerequisites (http://www14.software.ibm.com/support/customercare/iprt/home).
• IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/
ssic/interoperability.wss).
• The latest version of the device driver or IBM Power RAID adapter utilities (iprutils) can be downloaded
from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/webapp/
set2/sas/f/lopdiags/home.html).
• For support details, see the Linux Alert website (http://www14.software.ibm.com/webapp/set2/sas/f/
lopdiags/info/LinuxAlerts.html).
PCIe3 2x4 NVMe M.2 internal carrier adapter (FC EC59)
Learn about the specifications and operating system requirements for the PCIe3 2x4 NVMe M.2 internal
carrier adapter (FC EC59).
Overview
The PCIe3 2x4 NVMe M.2 internal carrier adapter is an internal PCI Express generation-3 (PCIe3) adapter
that is integrated into the supported systems. The adapter supports up to two NVMe M.2 Flash modules
(FC ES14) and is intended to be used primarily for storage (operating system boot).
Depending on your system, you can have the following configurations:
Managing PCIe adapters 109
Summary of Contents for Power Systems Series
