v
If you are using a switch, ensure that the speed in the switch is set to
auto/auto
. If the server is
directly attached to the HMC, ensure the Ethernet adapter speed on the HMC is set to
auto/auto
.
For information about how to set media speeds, see Setting the media speed (http://
www.ibm.com/support/knowledgecenter/POWER8/p8hai/lanmediaspeed.htm).
3.
If you are connecting a second HMC to your managed server, connect to the Ethernet port that is
labeled
HMC2
on the managed server.
4.
Continue with “Routing cables through the cable-management arm and connecting expansion units”
on page 28.
Cabling the server and accessing the IVM:
When you install the Virtual I/O Server (VIOS) in an environment where no Hardware Management
Console (HMC) is present, the VIOS automatically creates a management partition whose interface is the
Integrated Virtualization Manager (IVM).
To prepare for and install the VIOS and enable the IVM, complete the following steps:
1.
Connect a serial cable from a PC or ASCII terminal to a system port on the server. For details, see
“Cabling the server with an ASCII terminal” on page 25.
2.
Complete the following steps:
a.
Verify that you have access to the Advanced System Management Interface (ASMI) by using the
web interface. For details, see Accessing the ASMI using a web browser.
b.
Verify that you have administrator or authorized service provider authority in ASMI.
c.
Using the Web-based ASMI, change the following settings as appropriate for the type of partition
on which you are installing the Integrated Virtualization Manager:
For an AIX or Linux partition, complete the following steps to change the partition boot mode:
1)
In the navigation area, expand
Power/Restart Control
.
2)
Click
Power On/Off System
.
3)
Select
Boot to SMS menu
in the
AIX or Linux partition mode
by boot field.
4)
If you are installing the Integrated Virtualization Manager on an IBM System i model, select
AIX or Linux
in the
Default partition environment
field.
5)
Click
Save settings and power on
.
d.
Open a terminal session on the PC, using an application such as HyperTerminal, and wait for the
SMS menu to appear. Be sure that the line speed is set to 19,200 bits per second to communicate
with the system unit.
e.
Using the Web-based ASMI, change the partition boot mode back so that the server loads the
operating environment during startup:
1)
Expand
Power/Restart Control
.
2)
Click
Power On/Off System
.
3)
Select
Continue to operating system
in the
AIX or Linux partition mode
boot field.
4)
Click
Save settings
.
3.
Insert the
Virtual I/O Server
CD or DVD into the optical drive.
4.
In SMS, select the CD or DVD as the boot device:
a.
Select
Select Boot Options
, and press Enter.
b.
Select
Select Install/Boot Device
, and press Enter.
c.
Select
CD/DVD
, and press Enter.
d.
Select the media type that corresponds to the optical device, and press Enter.
e.
Select the device number that corresponds to the optical device, and press Enter.
f.
Select
Normal Boot
, and confirm that you want to exit SMS.
5.
Install the Virtual I/O Server:
Installing the IBM Power System S822 (8284-22A)
27
Summary of Contents for Power System S822
