IBM Power System LC921 9006-12P, Service Manual

Page: 105 / 132

Figure 76. Power switch for 5104-22C, 9006-22C, or 9006-22P
What to do next
If you press the power button and the system does not start, contact your next level of support or your
service provider.
Stopping the 5104-22C, 9006-12P, 9006-22C, or 9006-22P system
To stop the system, complete the steps in this procedure.
Procedure
You can use the Linux
shutdown command to stop and power down the system.
For example, the following command will shut down the system in 10 minutes and send the message
"Repairs coming" to the users.
shutdown -P +10 "Repairs coming"
The -P setting instructs the system to shut down and then power down. The + indicates the time in
minutes before the shutdown occurs.
Common procedures for servicing or installing features in the 9006-12P 91