IBM Power System L922, Manual

Page: 23 / 40

Figure 6. Removing the TPM card
Replacing the trusted platform module card in the 5105-22E, 9008-22L, 9009-22A,
9009-22G, 9223-22H, or 9223-22S system
To replace the trusted platform module (TPM) card, complete the steps in this procedure.
Procedure
1. Ensure that you have the electrostatic discharge (ESD) wrist strap on and that the ESD clip is plugged
into a ground jack or connected to an unpainted metal surface. If not, do so now.
2. Replace the TPM card.
a) Insert the TPM card into its slot in location P1-C14 on the system backplane as shown in Figure 7
on page 10.
b) Push the TPM card into place until it is fully seated.
Trusted platform module card for the 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, or 9223-22S 9