1.
Insert the removable handles into the slots on either side of the system chassis.
2.
Lift the handles so that they slide into the grooves and lock into place.
Installing the IBM Power 750 (8408-E8D) and IBM PowerLinux 7R4
(8248-L4T) system into the rack
Use the procedure in this section to install the IBM Power 750 (8408-E8D) and IBM PowerLinux 7R4
(8248-L4T) systems into the rack. The information provided is intended to promote safety and reliable
operation.
CAUTION:
This system requires three people to install the system into the rack.
To install the 8408-E8D and 8248-L4T into the rack, complete the following steps:
1.
Position one person in front of the system
(1)
, one person on the left side of the system
(2)
and one
person on the right side of the system
(3)
.
Figure 8. Inserting the removable handles
Installing the server into a rack
9
Summary of Contents for Power 750 Express 8408-E8D
