manualshive.com logo in svg

IBM Power 720 Express, Overview

The IBM Power 720 Express is a reliable and powerful product designed to meet your business needs. With its comprehensive Installation Manual, users can easily set up the device hassle-free. Download this manual for free from manualshive.com, ensuring a smooth installation process.

Share
Download
background image

104

 

IBM Power 720 and 740  Technical Overview and Introduction

For details about the software available on IBM Power Systems, visit the IBM Power Systems 
Software™ website:

http://www.ibm.com/systems/power/software/index.html

2.12.1  IBM AIX operating system

The following sections describe various levels of AIX operating system support.

IBM periodically releases maintenance packages (service packs or technology levels) for the 
AIX operating system. Information about these packages, downloading, and obtaining the 
CD-ROM is on the Fix Central website:

http://www-933.ibm.com/support/fixcentral/

The Fix Central website also provides information about how to obtain the fixes that are 
included on CD-ROM.

The Service Update Management Assistant (SUMA), which can help you to automate the 
task of checking and downloading operating system downloads, is part of the base operating 
system. For more information about the 

suma

 command, go to the following website:

http://www14.software.ibm.com/webapp/set2/sas/f/genunix/suma.html

IBM AIX Version 5.3

At the time of writing, AIX Version 5.3 is not supported with the Power 720 and Power 740.

IBM AIX Version 6.1

The following minimum levels of AIX Version 6.1 support the Power 720 and Power 740:

򐂰

AIX V6.1 with the 6100-08 Technology Level and Service Pack 2, or later

򐂰

AIX V6.1 with the 6100-07 Technology Level and Service pack 7, or later (planned 
availability March 29, 2013)

򐂰

AIX V6.1 with the 6100-06 Technology Level and Service pack 11, or later (planned 
availability March 29, 2013)

A partition that uses AIX 6.1 can run in POWER6, , or POWER7 mode. The best 
approach is to run the partition in POWER7 mode to allow exploitation of new hardware 
capabilities such as SMT4 and Active Memory Expansion.

IBM AIX Version 7.1

The following minimum level of AIX Version 7.1 supports the Power 720 and Power 740:

򐂰

AIX V7.1 with the 7100-02 Technology Level and Service Pack 2, or later

Statement of Direction (SoD): IBM intends to provide to those clients with AIX 5.3 
Technology Level 12 (and the associated service extension offering) the ability to run that 
environment on the Power 720 and Power 740.

Statement of Direction (SoD): IBM intends to provide to those clients with AIX 7.1 
Technology Level 0, Technology Level 1, or both, the ability to run that environment on 
the Power 720 and Power 740.

Summary of Contents for Power 720 Express















































































































































































































Reviews:

No comments

Related manuals for Power 720 Express

Daxten IBOOT - Brochure preview
IBOOT -
Brand: Daxten Pages: 2
M-system Current Loop Supply M3LDY Installation Manual preview
Current Loop Supply M3LDY
Brand: M-system Pages: 6
National Instruments NI PXIe-1062Q User Manual preview
NI PXIe-1062Q
Brand: National Instruments Pages: 8
Dometic SMP301-02 Installation And Operating Manual preview
SMP301-02
Brand: Dometic Pages: 104
O'Briens 13/70 Manual preview
13/70
Brand: O'Briens Pages: 12
Skil F 012 248 701 Parts Manual preview
F 012 248 701
Brand: Skil Pages: 3
nextys NPSM481 Series Instruction Manual preview
NPSM481 Series
Brand: nextys Pages: 5
SCANMASKIN Multistripper mini Manual preview
Multistripper mini
Brand: SCANMASKIN Pages: 21
FLORABEST 72648 Translation Of Original Operation Manual preview
72648
Brand: FLORABEST Pages: 48
Cloudray MYJG-40 User Manual preview
MYJG-40
Brand: Cloudray Pages: 7
Caen ELS OCEM NGPS 100-100E User Manual preview
OCEM NGPS 100-100E
Brand: Caen ELS Pages: 102
Ingersoll-Rand 1100PS4 Series Operation And Maintenance Manual preview
1100PS4 Series
Brand: Ingersoll-Rand Pages: 23
MADER KWIW1802-20 Instructions Manual preview
KWIW1802-20
Brand: MADER Pages: 44
NAIM NAPSC - 2 Manual preview
NAPSC - 2
Brand: NAIM Pages: 12
SUHNER ABRASIVE UMB 4-RQ Technical Document preview
ABRASIVE UMB 4-RQ
Brand: SUHNER Pages: 36
Agilent Technologies 6641A Operating Manual preview
6641A
Brand: Agilent Technologies Pages: 142
tacwise Hobby 53 Operator'S Manual preview
Hobby 53
Brand: tacwise Pages: 28
Extron electronics EPS 1210 P Specification Sheet preview
EPS 1210 P
Brand: Extron electronics Pages: 1

Brands by name

Popular brands

Load more brands