IBM PC Server 330, User Handbook Manual, Page: 274 / 382

Ethernet Controller Messages
PCNTNW-NW-072 A resource tag is unavailable.
Explanation: The driver tried to allocate some resources that were not available.
Action: Add or free some memory in the server. Then, restart the server.
PCNTNW-NW-073 Unable to allocate memory.
Explanation: The driver failed to allocate the memory needed for normal operation.
Action: Add more memory, or free some memory resources in the server. Then,
restart the server.
PCNTNW-NW-074 The hardware interrupt cannot be set.
Explanation:
An attempt was made to initialize a given hardware interrupt. The
attempt was not successful.
Action: Perform the following steps:
1. Verify that the Ethernet jumper on the system board is set to the default, enabled
position.
2. Make sure that the interrupt request numbers are set correctly, and that no other
devices are using the interrupt. See “PCI Routing” on page 94 for more
information.
PCNTNW-NW-075 The MLID cannot be registered with the LSL.
Explanation: An error occurred while the driver was trying to register with Link
Support Layer.
Action: Check the version of Netware Operating System. Make sure that this driver
is correct for the version of Netware that you are using. Restart the server.
PCNTNW-NW-076 The polling procedure cannot be added.
Explanation: An error occurred while the driver was adding a polling procedure to
the Netware Operating System polling routines.
Action: Check the version of Netware Operating System. Make sure that this driver
is correct for the version of Netware that you are using. Restart the server.
PCNTNW-NW-077 The event notification cannot be registered.
Explanation: The driver failed to register its event notification routines with the
Netware Operating System.
Action: Check the version of Netware Operating System. Make sure that this driver
is correct for the version of Netware that you are using. Restart the server.
260
PC Server 330 User's Handbook