IBM Netfinity ServeRAID-4H Ultra160, User Reference

Page: 64 / 192

Installing on Windows 2000, Windows NT 4.0, Windows 98, or
Windows 95
Note: This version of the ServeRAID Manager program supports up to 12
ServeRAID controllers when using Microsoft NT 4.0 or Windows 2000.
To install the ServeRAID Manager program for Windows NT 4.0 or Windows 2000,
do the following:
1. Insert the IBM ServeRAID Support CD into the CD-ROM drive.
2. The installation program starts. Follow the instructions on the screen to install
the program.
Note: If you are installing on an IBM Netfinity server that supports Hot-plug PCI
under Windows NT 4.0, select the IBM ServeRAID Hot Replace Wizard
to enable the hot-replace operation.
Installing on NetWare
Notes:
1. To install the NetWare version of the ServeRAID Manager program, you must
install from a Microsoft Windows client that is connected to the NetWare system.
2. ServeRAID does not support NetWare versions older than 4.2.
3. ServeRAID Manager supports only NetWare 5.x and later. Use the command
line utilities IPSSEND and IPSMON for NetWare 4.x.
4. This version of the ServeRAID Manager program supports up to 8 ServeRAID
controllers when using NetWare.
Important
To install the ServeRAID Manager program, you must have a network drive mapped to the
root directory of the SYS partition.
Before you install the ServeRAID Manager program, be sure you have the following
installed on your NetWare 5.x system:
v
Install the latest Support Pack before installing the Novell JVM for NetWare. Download
the latest Support Pack from the following address:
http://support.novell.com/misc/patlst.htm#nw
v
Use the Novell Java Virtual Machine version 1.1.7 or later. Versions older than 1.1.7 are
not compatible with the ServeRAID Manager program. To check your JVM version, load
Java and type at the NetWare command prompt:
JAVA -VERSION
Download the latest JVM from the following address:
http://developer.novell.com/ndk/download.htm
To install the ServeRAID Manager program for Novell NetWare, do the following:
1. On a Microsoft Windows client that is connected to the NetWare system, map a
network drive to the root directory of your NetWare SYS partition.
2. Insert the IBM ServeRAID Support CD into the CD-ROM drive of the Windows
client. The installation program starts.
3. When prompted, choose the NetWare 5.x operating system.
4. When prompted for the installation directory, provide only the drive letter to the
NetWare SYS partition that you mapped in step 3.
50
IBM
®
Netfinity
®
User’s Reference: ServeRAID
™
-4H Ultra160 SCSI Controller