IBM N7800, Hardware And Service Manual, Page: 34 / 182

Table 8. Installation process procedures (continued)
Stage Procedure
Is the
procedure
required?
Procedure is performed by...
For instructions, see... Filer Gateway
2 IBM Service will
install the N7000
series system in a
freestanding rack, if
required. Yes IBM IBM The Installation and Setup
Instructions that came with your
system
3 Connect the N7000
series system to the
customer-provided
IP (Internet
Protocol) network. Yes IBM Customer “Connecting your N7000 series
system to an IP network” on page
9, or the
Installation and Setup
Instructions that came with your
system
4 Filer: Connect the
N7000 filer system
to storage
expansion units.
Yes IBM n/a “Connecting a filer to storage
expansion units” on page 10, or the
Installation and Setup Instructions
that came with your system
Gateway: Connect
the N7000 gateway
system to the
back-end storage.
Yes n/a Customer The Data ONTAP Gateway
Implementation Guide for your
back-end storage and version of
Data ONTAP
5
Connect the N7000
series system to a
power source. Yes IBM Customer “Connecting your N7000 series
system to a power source” on page
10, or the
Installation and Setup
Instructions that came with your
system
6 Configure the
system. Yes IBM Customer The Data ONTAP Software Setup
Guide for your version of Data
ONTAP, or the Installation and
Setup Instructions that came with
your system
7 Connect the N7000
series system to a
third-party device. No Customer Customer “Connecting your N7000 series
system to storage” on page 10
8
IBM System Storage: N7000 Series Hardware and Service Guide