IBM N3400, Installation And Setup Instructions

Page: 14 / 30

Connecting the N3400 to a network
Use these instructions to connect the N3400 to a network.
Note: Use the cable management arms and hook-and-loop fasteners to organize your cabling.
1. Connect the RJ-45 to DB-9 adapter from the adapter kit to the Console port on the system.
2. Connect one end of the serial null modem cable to your console, then connect the other end to the
DB-9 end of the adapter.
3.
Connect your system to the network by plugging the network cables into the networking ports,
labeled e0a and e0d.
4. If applicable, use an Ethernet cable to connect the Remote Management port to the network.
S
A
S
SAS
Console Ethernet
Fibre
Channel
Remote
Management
port
n340007
e0b
e0a
0a 0b
e0c e0d e0P
S
A
S
SAS
n340008
e0b
e0a
0a 0b
e0c e0d e0P
S
A
S
SAS
n340009
e0b e0a
0a 0b
SAS
e0c
e0d
e0P
S
A
S
n340010
8