IBM Multimedia Kit for RS/6000 Setup Procedure
System Requirements
The Ultimedia Video Capture adapter must be installed in your system (enter
lsdev
-Ps pci
).
WorkGroup Conferencing for AIX or Ultimedia Services for AIX must be installed on
your system (enter
lslpp -aL | grep WorkGroup
or
UMS
).
One of the following RS/6000 workstations configured with AIX Version 4.1.5 or
higher, graphic display adapter, keyboard and mouse: 7248, 7043, or 7025 Model
F40.
A graphics adapter with multiple hardware colormaps is required to enhance color
quality of multiple, simultaneous video windows and to prevent color palette flashing.
RS/6000 graphics adapters with multiple color maps include the following POWER
GXT families: 200P, 500P, 800P, 1000P, and 3000P.
Unpack The IBM Multimedia Kit for RS/6000
After you unpack your IBM Multimedia Kit for RS/6000, make sure you have the following
items available during the setup procedure:
Amplified speakers with integrated audio cables, and a power transformer.
Video Camera with integrated microphone and video cable, a power transformer, and
a Video Camera User Manual.
The following items are recommended, but not required:
– Access to online help for WorkGroup Conferencing for AIX or documentation for
Ultimedia Services for AIX.
– User's Guide for your system unit.
Contact your authorized reseller or marketing representative if any items are missing or
damaged.
Connect the Speakers to the System Unit
1. Place the speakers where they are to be used.
2. Connect the cable from the left speaker to the right speaker.
3. Connect the cable from the right speaker to the audio output or headphone jack at the
back of the system unit.
4. Connect the speaker power transformer to the back of the right speaker, then plug the
speaker power transformer into an electrical outlet.
1 Left Speaker
1 Right Speaker
3
4
2
Speaker Controls
Right Speaker
3
2
1
1. Power on LED is green when power is on.
2. Power/Volume control knob.
3. Tone control knob.
IBM Multimedia Kit for RS/6000 Setup Procedure
1
