IBM MTM 2145-12F, Hardware Installation Manual

Page: 58 / 214

b. Turn the connector 180 degrees.
2. Install the CMA inner connector (
▌1▐
) onto the CMA connector base on the
inner member (
▌2▐
) as in the following figure.
3. Install the CMA outer connector (
▌3▐
) onto the CMA connector base on the
outer member (
▌4▐
), as shown in the following figure.
sv100017
1
2
Figure 24. Reversing the orientation of the assembly
1
2
sv100019
Figure 25. Install the inner member
3
4
sv100020
Figure 26. Install the outer member
24
SAN Volume Controller: Model 2145-SV1 Hardware Installation Guide