M768MR Mainboard User’s Manual
PCI / Plug and Play Setup Page
This page sets some of the parameters for devices installed on the
system PCI bus, and devices that use the system plug and play
capability.
Plug and Play
Aware O/S
Enable this item if you are using an O/S that
supports Plug and Play such as Windows 95 or
98.
Primary Graphics
Adapter
Use this item to define if your primary graphics
adapter is installed in a PCI slot or on an AGP
bus.
PCI VGA Palette
Snoop
When this item is enabled, multiple VGA
devices operating on different buses can handle
data from the CPU on each set of palette
registers on every video device.
Assign IRQ for
VGA
If this item is enabled, an IRQ will be assigned
to the VGA graphics system. We recommend
that you set this value to No.
Offboard PCI IDE
Card
If you are using an IDE interface add-in card,
use this item to define which PCI slot the card is
installed in. Leave this item at Auto for
automatic detection.
30
