manualshive.com logo in svg

IBM L5U, Maintenance Information

Share
Download
IBM L5U Maintenance Information Download Page 230

9-36

TS3400 Tape Library Maintenance Information

Figure 9-40. Flat cable plate assembly removal

Replacement Procedure

1.

Remove the packaging from the replacement flat cable plate assembly.

2.

To replace the flat cable plate assembly, perform the steps to remove the flat cable 
plate assembly in reverse order, taking the following points into account.
• Ensure that the flat cable lays flat along the flat cable plate.
• The flat cable passes underneath the flange on the Accessor assembly.
• After reconnecting the Accessor flat cable connector block, pull on the flat 

cable to remove any slack and to ensure the cable lies flat along the entire 
length of the flat cable plate.

3.

Run the 

Library Verify

 test in the 

Service Mode

 menu. See “Running Library 

Verify Diagnostics” on page 7-5.

4.

If requested, take the library online. See “Taking the Library Offline/Online” on 
page 7-23.

5.

Go to “End of Call” on page 7-26.

a

34z0055

1

2

Summary of Contents for L5U








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands