manualshive.com logo in svg

IBM L5U, Maintenance Information

Share
Download
IBM L5U Maintenance Information Download Page 212

9-18

TS3400 Tape Library Maintenance Information

Figure 9-16. LCD display card screw locations

Replacement Procedure

1.

Remove the packaging from the replacement LCD display card.

2.

To replace the LCD display card, perform the steps to remove the LCD display 
card in reverse order.

3.

Run the 

Library Verify

 test in the 

Service Mode

 menu. See “Running Library 

Verify Diagnostics” on page 7-5.

4.

If requested, take the library online. See “Taking the Library Offline/Online” on 
page 7-23.

5.

Package the failed LCD display card in the same packaging that the new LCD 
display card was shipped to you in, and return to IBM.

6.

Go to “End of Call” on page 7-26.

a34z0023

1

Summary of Contents for L5U








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands