■
Ensure that the cabinet allows the chassis hot exhaust air to exit the cabinet
without recirculating into the device.
■
The device must be installed into a rack that is secured to the building structure.
■
The device should be mounted at the bottom of the rack if it is the only unit in
the rack.
■
When mounting the device in a partially filled rack, load the rack from the bottom
to the top with the heaviest component at the bottom of the rack.
Required Tools
To unpack the Ethernet appliance and prepare for installation, you need the following
tools:
■
A mechanical lift
■
Phillips (+) screwdrivers, numbers 1 and 2
■
2.5-mm flat-blade (–) screwdriver
■
3/8-in. nut driver
■
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the
shipping pallet
■
Electrostatic discharge (ESD) wrist strap (provided)
■
Antistatic mat
Step 1: Prepare the Site
■
5
Step 1: Prepare the Site
