IBM Infoprint 1410, User Manual, Page: 62 / 254

Print media specifications and guidelines
59
Media specifications and guidelines
Do not remove trays while a job prints or while Busy displays on the control panel. Doing so may
cause a jam.
Loading the standard tray or the optional 250-sheet tray
The following instructions work for loading the standard tray or the tray for the optional 250-sheet
drawer.
Your MFP has one standard 250-sheet tray. You may use the optional 250-sheet drawer or the
optional 500-sheet drawer as a print media source; however, you may use only one of these options
at a time. See your Setup Guide for installation information.
For the sizes and types of print media these trays support, see Print media source specifications .
To load the tray for the optional 500-sheet drawer, see Loading the optional 500-sheet tray .
To load print media in a tray:
1
Remove the tray.
2
Press down on the metal plate until it locks into place.