IBM Infoprint 1410, User Manual

Page: 39 / 254

Printing information
36
Printing, copying, faxing, and scanning
Printing a font sample list
To print samples of all the fonts currently available for your MFP:
1
Make sure the MFP is on.
2
Press the Administration (key) button.
3
Press the right arrow button to highlight
Print Reports
, and then press
✓
.
4
Press the down arrow button until you reach
Print Fonts
, and then press
✓
.
5
Press the down arrow button until you reach either
PCL Fonts
or
PS Fonts
.
• Select
PCL Fonts
to print a listing of the fonts available to the PCL emulator.
• Select
PS Fonts
to print a listing of the fonts available to the PostScript 3 emulator.
6
Press
✓
.
The message
Printing Font List
appears.
Canceling a print job from the MFP control panel
If the job you want to cancel is printing or in the device print queue:
1
Press the Print/Profiles or Stop button.
2
Press the down arrow button until you reach
Cancel Print Jobs
.
3
Press
✓
. A list of print jobs appears. Use the up and down arrows to scroll through the list.
Highlight the job you need to cancel. Press
✓
.
4
Use the left arrow button to highlight
Delete
.
5
Press
✓
. The print jobs that you highlighted are then deleted. The message
Canceling
print job(s).
appears.
Canceling a print job from your computer
Search on your computer for the correct screens that let you cancel or delete your print jobs.
Printing a directory list
A directory list shows all the resources stored in flash memory. To print:
1
Make sure the MFP is on and the
Ready
message appears on the control panel.
2
Press the Administration (key) button.
3
Press the right arrow button to highlight
Print Reports
, and then press
✓
.