IBM Infoprint 1410, User Manual

Page: 202 / 254

Menus
199
Using the MFP control panel and menus
Network/USB
Note: Values marked by an asterisk (*) are the factory default settings.
TCP/IP
Internet Protocol (IP) specifies the format of packets, also called datagrams, and the addressing
scheme. Most networks combine IP with a higher-level protocol called Transmission Control Protocol
(TCP). TCP enables two hosts to establish a connection and exchange streams of data. TCP
guarantees delivery of data and also guarantees that packets are delivered in the same order in
which they were sent.
Fax Delayed/Pending
Log Prints a log of the faxes in the send
queue and faxes received but not
printed. Once a fax prints, it appears in
the Fax Receive Log.
NetWare Setup Page Prints a page listing the NetWare
protocol settings.
Print Fonts Prints a sample of all the fonts available
for the selected printer emulation. PCL Fonts Prints a sample
of all MFP fonts
available for
PCL emulation.
PostScript
Fonts Prints a sample
of all MFP fonts
available for
PostScript
emulation.
Print Directory Prints a report showing all the resources
stored in flash memory.
This menu item only appears on the
control panel if there is an installed
optional flash memory card.
Network/USB – TCP/IP
Menu item Purpose Values and descriptions
Address Defines a specific address on the
network which defines the device. 4 field IP
address
Netmask Defines information that the network
uses to decide how to search for the
specific IP address. 4 field
mask
Gateway Provides the address of the machine that
controls the communication for the sub-
network. 4 field IP
address
Print Reports(continued)
Menu item Purpose Values and descriptions