IBM Infoprint 1410, User Manual

Page: 186 / 254

Menus
183
Using the MFP control panel and menus
Auto Continue To define the amount of time (in
seconds) the MFP waits after
displaying an operator intervention
error message before it resumes
printing. Disabled* MFP does not resume
printing until someone
clears the error
message.
5–255 MFP waits the specified
amount of time, and then
automatically resumes
printing. This timeout
value also applies if the
menus are displayed
(and the MFP is offline)
for the specified period
of time.
Download Target To specify the storage location for
downloaded resources.
Storing downloaded resources in
flash memory is permanent
storage rather than the temporary
storage that RAM provides. The
resources remain in the flash
memory even when the MFP is
turned off.
Values are only shown if formatted,
non-defective, and not password
protected.
RAM* All downloaded
resources are
automatically stored in
MFP memory (RAM).
Flash All downloaded
resources are
automatically stored in
flash memory if an
optional flash memory
card is installed.
Jam Recovery To establish whether the MFP
reprints jammed pages. On MFP reprints jammed
pages.
Off MFP does not reprint
jammed pages.
Auto* MFP reprints a jammed
page unless the memory
required to hold the
page is needed for other
tasks.
Page Protect To successfully print a page that
may otherwise generate
Complex
Page
errors.
If, after selecting On, you still
cannot print the page, you may
also have to reduce the size and
number of fonts on the page, or
increase the installed MFP
memory.
For most print jobs, you do not
need to select On. When On is
selected, printing may be slower.
Off* Prints a partial page of
data if memory is
insufficient to process
the entire page.
On Ensures that an entire
page is processed
before it prints.
Defaults Menu – Print Settings – Setup Menu(continued)
Menu item Purpose Values and descriptions