Menus
182
Using the MFP control panel and menus
Setup Menu
Use the Setup Menu to configure a variety of MFP features.
Note: Values marked by an asterisk (*) are the factory default settings.
Toner Darkness
To lighten or darken text images, or
conserve toner.
1–10 (8*)
Select a lower value for finer line width, higher
definition in graphics, and lighter grayscale images.
Select a higher value for bolder line widths or
darker grayscale images. Select 10 for very bold
text. Select a value less than 7 to conserve toner.
A vertical bar ( | ) indicates the factory default value
which is 8. An arrow symbol ( V ) indicates the user
default value and this is also shown as the number
on the left. The number and the location of the V
change as you use the left and right arrow buttons
to move the symbol to the setting you want.
PictureGrade
To improve the quality of grayscale
printing at 300 and 600 dots per
inch (dpi) in PostScript emulation.
On
Uses modified screening
parameters to improve print
quality of graphics.
Off*
Uses standard screening
parameters.
Defaults Menu – Print Settings – Setup Menu
Menu item
Purpose
Values and descriptions
Alarm Control
To establish whether the MFP
sounds an alarm when the MFP
requires operator intervention.
Off
MFP does not sound an
alarm.
Single*
MFP sounds three quick
beeps.
Continuous
MFP repeats three
beeps every 10
seconds.
Defaults Menu – Print Settings – Quality Menu(continued)
Menu item
Purpose
Values and descriptions
4 - . . .v . . . | . . +
Summary of Contents for Infoprint 1410
