IBM Infoprint 1410, User Manual

Page: 125 / 254

Solving printing problems
122
Troubleshooting
A jam message remains on the
control panel even though you
cleared the jam. • Make sure you cleared the entire paper path.
• Press
✓
.
• Open and close the upper front door to restart the MFP.
• Make sure the print cartridge is installed.
While in PostScript 3 or PCL
emulation, the MFP is flushing
data (
Flushing buffer
remains
on the control panel).
• Make sure you are using the correct PostScript driver.
• The MFP does not have enough memory to print the job.
Install more memory. Refer to the Setup Guide for information
about installing optional memory cards.
Problem Solution