IBM IC35L040AVVN07-0 - 40GB IDE Deskstar 120GXP 7200RPM UATA-100..., Specifications

Page: 153 / 211

11.19 Read Verify Sectors (40h/41h)
see below Status 0 0 1 0 0 0 0 R Command
- - - - H H H H Device/Head 1 L 1 D H H H H Device/Head
V V V V V V V V
Cylinder High
V V V V V V V V
Cylinder High
V V V V V V V V Cylinder Low V V V V V V V V Cylinder Low
V V V V V V V V Sector Number V V V V V V V V Sector Number
V V V V V V V V
Sector Count
V V V V V V V V
Sector Count
see below Error - - - - - - - - Feature
- - - - - - - - Data - - - - - - - - Data
7 6 5 4 3 2 1 0
Register
7 6 5 4 3 2 1 0
Register
Command Block Input
Registers
Command Block Output
Registers
V – 0 – V 0 V 0 V 0 V 0 V 0 V 0
ERR IDX COR DRQ DSC DF RDY BSY AMN T0N ABT 0 IDN 0 UNC CRC
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
Status Register Error Register
Figure 117. Read Verify Sectors Command (40h/41h)
The Read Verify Sectors verifies one or more sectors on the device. No data is transferred to the host.
The difference of Read Sectors command and Read Verify Sectors command is whether the data is
transferred to the host or not.
If an uncorrectable error occurs, the read verify will be terminated at the failing sector.
Output parameters to the device
Sector Count The number of continuous sectors to be verified. If zero is specified, 256 sectors
will be verified.
Sector Number The sector number of the first sector to be transferred. (L=0)
In LBA mode this register contains LBA bits 0 - 7. (L=1)
Cylinder High/Low The cylinder number of the first sector to be transferred. (L=0)
In LBA mode this register contains LBA bits 8 - 15 (Low), 16 - 23 (High). (L=1)
H The head number of the first sector to be transferred. (L=0)
In LBA mode this register contains LBA bits 24 - 27. (L=1)
R The retry bit. This bit is ignored..
Deskstar 120GXP hard disk drive specifications
139