IBM IC35L040AVVN07-0 - 40GB IDE Deskstar 120GXP 7200RPM UATA-100..., Specifications

Page: 112 / 211

10.2 PIO Data Out commands
These commands are PIO Data Out commands:
!
Device Configuration Set
!
Format Track
!
Security Disable Password
!
Security Erase Unit
!
Security Set Password
!
Security Unlock
!
Set Max Set Password command
!
Set Max Unlock command
!
SMART Write Log Sector
!
Write Buffer
!
Write Long
!
Write Multiple
!
Write Sectors
Execution includes the transfer of one or more 512 byte (>512 bytes on Write Long) sectors of data from
the host to the device.
1. The host writes any required parameters to the Features, Sector Count, Sector Number, Cylinder,
and Device/Head Registers.
2. The host writes the command code to the Command Register.
3. The device sets BSY=1.
4. For each sector (or block) of data to be transferred:
a. The device sets BSY=0 and DRQ=1 when it is ready to receive a sector (or block).
b. The host writes one sector (or block) of data via the Data Register.
c. The device sets BSY=1 after it has received the sector (or block).
d. When the device has finished processing the sector (or block), it sets BSY=0 and interrupts the
host.
e. In response to the interrupt, the host reads the Status Register.
f. The device clears the interrupt in response to the Status Register being read.
5. For the Write Long command:
a. The device sets BSY=0 and DRQ=1 when it is ready to receive a sector.
b. The host writes one sector of data including ECC bytes via the Data Register.
c. The device sets BSY=1 after it has received the sector.
d. After processing the sector of data the device sets BSY=0 and interrupts the host.
e. In response to the interrupt, the host reads the Status Register.
f. The device clears the interrupt in response to the Status Register being read.
Deskstar 120GXP hard disk drive specifications
98