IBM IBM-3455, Installation And Operating Manual

Page: 7 / 38

IBM-3455 PARTS CHECKLIST
6
6. Short line cord for
wall installation
1 2 3
4 5 6
7 8 9
0 #
OPER
WXYZ TUV PQRS
MNO JKL GHI
DEF ABC
NEW
CALL
VOLUME
REDIAL
PAUSE
FLASH CHAN
TONE
CID
DELETE
MEM
MENU
HOLD
CHARGE
1. Handset 2. Base
3. AC power adapter 4. Reversible pedestal
7. Quick start card
5. 7-foot line
cord for desk use
QUICK START GUIDE
IBM-3455
1. Insert the pedestal into the slots on the
bottom of the base and slide up to lock in
place. The pedestal is reversible for desk
or wall mounting.
2. Connect the telephone line cord to the
“LINE” jack and to a telephone outlet.
3. Connect the AC power adapter to the
9V DC jack and to an AC outlet.
4. Raise the antenna vertically.
SETTING UP THE BASE
USE ONLY CLASS 2
POWER SUPPLY
P T 300mA TEL LINE !
1. Slide open the battery door.
2. Insert the battery into the battery
compartment so that its connectors line
up with those on the handset.
3. Close the battery compartment door.
4. Place the handset on the base and allow
it to charge for 12 hours.
INSTALL THE BATTERY
1. Pick up the handset from the base.
2. Press P . The display will show "CONNECTING". Once the IBM-3455 has
acquired a line the display will show the channel that it is using (eg.
CHANNEL 50). Wait until you hear a dial tone.
3. Dial the number you wish to dial.
4 When you are finished talking, press the
P
key or place the unit back into
the base to end the call.
MAKING CALLS
3.
6 vo
lt N i C
d B
at te ry
8. Belt-Clip
9. Ni-Cd battery pack