IBM Hardware Management Console Installing And Configuring Download | Manualshive

Page: 102 / 108

background image

EN 55022 Klasse A Geräte müssen mit folgendem Warnhinweis versehen werden:
"Warnung: Dieses ist eine Einrichtung der Klasse A. Diese Einrichtung kann im Wohnbereich
Funk-Störungen verursachen; in diesem Fall kann vom Betreiber verlangt werden, angemessene
Maßnahmen zu ergreifen und dafür aufzukommen."

Deutschland: Einhaltung des Gesetzes über die elektromagnetische Verträglichkeit von Geräten

Dieses Produkt entspricht dem “Gesetz über die elektromagnetische Verträglichkeit von Geräten
(EMVG)“. Dies ist die Umsetzung der EU-Richtlinie 2004/108/EG in der Bundesrepublik Deutschland.

Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit von
Geräten (EMVG) (bzw. der EMC EG Richtlinie 2004/108/EG) für Geräte der Klasse A

Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen
- CE - zu führen.

Verantwortlich für die Einhaltung der EMV Vorschriften ist der Hersteller:
International Business Machines Corp.
New Orchard Road
Armonk, New York 10504
Tel: 914-499-1900

Der verantwortliche Ansprechpartner des Herstellers in der EU ist:
IBM Deutschland GmbH
Technical Regulations, Abteilung M372
IBM-Allee 1, 71139 Ehningen, Germany
Tel: +49 7032 15 2941
email: [email protected]

Generelle Informationen:

Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse A

.

Electromagnetic Interference (EMI) Statement - Russia

Class B Notices

The following Class B statements apply to features designated as electromagnetic compatibility (EMC)
Class B in the feature installation information.

Federal Communications Commission (FCC) statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.

88

Power Systems: Installing and configuring the Hardware Management Console

«
...
100
101
102
103
104
...
»

Summary of Contents for Hardware Management Console













































































































Reviews:

No comments

Related manuals for Hardware Management Console

Brand: Varimixer Pages: 20

Brand: TL Audio Pages: 21

Brand: WAHL James Martin Pages: 12

Brand: Voodoo Lab Pages: 2

Brand: Omcan Pages: 28

Brand: Shaman Pages: 2

Brand: Boss Pages: 6

CUCINAGCGM-MO11B

Brand: Giani Pages: 11

Brand: Orange Amps Pages: 2

Brand: Way Huge Pages: 4

Brand: DAPAudio Pages: 18

Brand: Varimixer Pages: 55

Brand: Mackie Pages: 31

Brand: Ozito Pages: 8

Brand: Ozito Pages: 8

Brand: Bg Pages: 7

Brand: KitchenAid Pages: 20

Brand: KitchenAid Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands