13. When
RUNNING
changes to
OK
, scroll down to the bottom of the panel and locate the Installation
Summary. If the installation was successful,
SUCCESS
appears at the bottom of the panel in the Result
column of the Installation Summary.
14. Remove the device driver software media from the media device.
15. Press F10 to exit SMIT.
16. To shut down your system, type:
shutdown -F
Press Enter.
17. Go to “Installing the Adapter” on page 9.
Verify AIX Software Installation
To verify that the device driver for the adapter is installed, do the following:
Verify Gigabit Ethernet-SX PCI-X Adapter Software Installation
1. If necessary, log in as root user.
2. At the command line, type:
lslpp -l devices.pci.14106802.rte
3. Press
Enter.
Possible results are as follows:
v
If the Gigabit Ethernet-SX PCI-X Adapter device driver is installed, the following is an example of the
data that displays on your screen:
Fileset
Level
State
Description
-----------------------------------------------------------------------
Path: /usr/lib/objrepos
devices.pci.14106802.rte
5.1.35
COMMITTED
...Ethernet...
Adapter
Software
Path: /etc/objrepos
5.1.35
devices.pci.14106802.rte
COMMITTED
...Ethernet...
Adapter
Software
Verify that the
devices.pci.14106802.rte
filesets are installed at the AIX 5L for POWER version
5.1.35 with the 5100-03 Recommended Maintenance package (APAR IY32749) level or later.
If this information displays but you continue to have problems, go to Chapter 4, “Installing the
Gigabit Ethernet-SX PCI-X Adapter or Dual Port Gigabit Ethernet-SX PCI-X Adapter,” on page 9.
v
If no data displays on your screen, the Gigabit Ethernet-SX PCI-X Adapter device driver did not
install correctly. Return to Chapter 3, “Installing the Device Driver Software,” on page 5. Return to
“Verifying the Adapter Installation” on page 9 and continue with step 1 again.
If you continue to experience problems, it may be necessary to call your system support
organization. Refer to your operating system documentation for instructions.
Verify Dual Port Gigabit Ethernet-SX PCI-X Adapter Software
Installation
1. If necessary, log in as root user.
2. At the command line, type:
lslpp -l devices.pci.14108802.rte
3. Press
Enter.
Possible results are as follows:
v
If the Dual Port Gigabit Ethernet-SX PCI-X Adapter device driver is installed, the following is an
example of the data that displays on your screen:
6
Gigabit Ethernet-SX PCI-X and Dual Port Gigabit Ethernet-SX PCI-X Adapters Installation and Using Guide
Summary of Contents for Gigabit Ethernet-SX PCI-X Adapter
Page 2: ......
Page 31: ......
Page 32: ...Part Number 80P3146 Printed in USA SA23 1302 02 1P P N 80P3146 ...
