IBM FlashSystem 5000 Series, Quick Installation Manual

Page: 45 / 106

• Screw driver
• Two 16 A Power distribution units (PDU) IEC 60320 J and power cables
Safety notices and considerations
Before you install, service, or move a 5U expansion enclosure, always read and follow the safety notices
and guidelines.
Safety notices
Use the reference numbers in parentheses at the end of each notice (for example, D005) to find the
matching translated notice in IBM Systems Safety Notices.
DANGER: DANGER: Serious injury or death can occur if loaded lift tool falls over or if a heavy load
falls off the lift tool. Always completely lower the lift tool load plate and properly secure the load
on the lift tool before moving or using the lift tool to lift or move an object. (D010)
DANGER: Multiple power cords. The product might be equipped with multiple power cords. To
remove all hazardous voltages, disconnect all power cords. (L003)
DANGER:
Hazardous voltage present. Voltages present constitute a shock hazard, which can cause severe
injury or death. (L004)
DANGER:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted
with metal, which might result in splattered metal, burns, or both. (L005)
DANGER:
Observe the following precautions when working on or around your IT rack system:
Chapter 4. Installing the system hardware 27